Sending A Fax From The Fbs Glass - Muratec MFX-2530 Operating Instructions Manual

Basic fax
7
Now, everything is up to the machines — yours and the one you're dialing.
• If the fax has been set for Quick Memory transmit, your machine scans the
first page of your document into memory, then dials the other fax. When it
makes contact, your machine transmits the stored document from memory
while at the same time scanning the remaining pages of your document
into memory. (To set Quick Memory transmission, see page 3.70.)
• If the fax has been set for the normal memory transmit, your fax scans the
entire document into memory, then dials the other fax. When it makes con-
tact, your machine transmits the entire stored document from memory.
• If the fax is set for non-memory transmission, your machine simply dials
the other fax. When it makes contact, your machine feeds the document
through, scanning and transmitting it as it goes.
Note: The more "stuff" (called black coverage) your machine "sees" on a
page, the slower the page feeds through as the fax scans it. And even
if the page is relatively clean, sending it in grayscale mode or at cer-
tain resolutions makes your machine "see" more "stuff."
The same is true if you set the contrast to Dark.
Important: If you want to cancel a transmission while scanning the docu-
ment, press the
If you want to cancel a transmission in progress, use the Job
Review function. See "Canceling commands" on page 3.6.
8
After transmission, the machine beeps and return to its standby mode.
Note: If the call fails, see "Redialing," page 3.6.
3.4
All manuals and user guides at all-guides.com
key.
STOP
Sending a fax from the
Set your document that cannot be placed in the
time.
Note: The machine gives priority to the docum
send a fax, when the documents are set
1
If there's a document in the
, remove it.
ADF
2
Open the platen cover.
3
Place the document face
down on the glass and
FBS
align it with the document
scale on the rear and left, then gently clos
Make sure the document is set beyond the
Important: Gently close the platen cove
hands, possibly injuring the
Important: When sending a bound docu
image may contain some bla
down the document to preve
However, do not press too
glass and cause an injury.
4
Adjust resolution and contrast if necessary
Press to change the resolutio
RESOLUTION
Press to change the contrast.
CONTRAST
5
Enter the fax number.
Also, enter any access codes necessary, jus
call. (Example: Enter 9 to "dial out" from a
long-distance.)
6
Press .
START
By pressing , you've just given your
START
machine gives this action a command num
This command number appears on the LC
while the machine is scanning the docume
into the memory.
You'll need this command number to cance
transmission or to print a stored documen
pages 3.29–3.30).
gla
FBS