Delayed Transmission - Muratec MFX-2530 Operating Instructions Manual

Delayed transmission

Take advantage of lower evening and weekend long-distance rates with delayed
transmission. Your fax machine can store up to 100 delayed commands, each of
which you can program up to 31 days in advance.
Important: If you program all 100 delayed transmission commands, no memory
transmission is possible until one or more of the commands is com-
pleted. (To review memory transmission, see pages 3.3 and 3.70.)
However, if all 100 delayed commands are programmed, you can always
transmit manually using monitor/speaker dialing or an optional hand-
set (see page 3.5).
Setting up a delayed transmission
Important: Your machine only remembers the day of the month that it's supposed
to send a delayed transmission. It does not remember the month
itself. So if you want to send a transmission at 5:05
don't program the transmission sooner than 5:06
To set up a delayed transmission:
1
Place the document and make any necessary adjustments.
2
Press .
MENU
3
Select "Delayed Tx" and press [Enter].
The shows the current day of the month,
LCD
followed by the current time (in 24-hour for-
mat).
4
Use the numeric keypad to enter the day of the
month and the time when you want the fax to
send the delayed transmission.
All manuals and user guides at all-guides.com
PM
on May 26.
PM
Delayed Tx
Enter Trnsmit Time
04/14:20
Clear
5
6
on June 26,
7
Important: If you've stored too much informat
Enter
To review or cancel delayed commands, see "Job
When the date and time are entered, pres
mission. The shows:
LCD
Enter the fax number for the delayed tran
sion document. You can either press a one
key, enter a speed-dial number or use the
numeric keypad to enter the fax number.
Note: If you want to erase characters, pr
[Clear] to erase to the left.
If you want to change just one cha
in the number, move the cursor by
to erase it. Then re-enter the num
Press . Your machine returns to stan
START
mode, while showing this on the
This means your fax machine is "Reserved
the delayed transmission you just program
• If you set the machine for memory tran
sion, it will scan the document into me
after which you can use the machine n
• If you set the machine for manual tran
faxes but can't transmit until your dela
"Memory Overflow" message may
because (1) too many pages have b
the pages that are stored have too
fax machine to remember.
If this message appears, press
pages in memory as possible, or pr
all pages stored during the curren
tions).
:
LCD
STA