Erasing An Empty F-Code Box - Muratec MFX-2530 Operating Instructions Manual

5
Select the file number (01-30) of the document you want to erase.
If you want to erase the all documents in this bulletin box, select file number
"00".
6
Press [Enter].
The shows (see right):
LCD
Important: If you want to quit without eras-
ing the document you've selected,
press [Cancel]. The fax will
return to step 2.
7
Press [Erase] to erase the document(s) and the
machine will return to step 2.
If you want to erase other document, repeat steps 2–7.
To return to the standby mode, press
Using a relay box
Once your fax machine receives a document via
F-Code relay boxes, it sends it to the other fax machines that you've set up on your
relay box. (See "Creating or Modifying an F-Code box", page 3.44–3.48.)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See "If you chose
Relay," page 3.50 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine's F-Code box and get that machine to relay it to others. See "F-Code trans-
mission" on page 3.52 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.
All manuals and user guides at all-guides.com
02:Bulletin Box
OK to erase?
00:All stored documents.
01:Already stored.
02:Already stored.
03:Not stored.
04:Not stored.
Cancel
.
RESET
- sub-addressing to one of its
ITU T

Erasing an empty F-Code box

An F-Code box must be empty in order to erase
these steps which is not empty, the machine bee
EraseDoc
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press
2
Select the F-Code box you want to erase.
Erase
3
Press [EraseBox]. If the F-Code box is em
enter
4
Use the numeric keypad to enter your F-C
5
Press [Enter].
The
LCD
Note: If you want to quit without erasin
Note: If you want to quit without erasin
6
Press [Erase] to erase the document(s) an
If you want to erase other F-Code box, rep
To return to the standby mode, press
, , [Enter].
MENU N
. . code.
I D
shows (see right):
press [Cancel]. The machine will
machine returns to standby mode
RESE