Image Repeat - Muratec MFX-2530 Operating Instructions Manual

12
If you want to change the layout, proceed to next step. Otherwise, skip to step
16.
Note: Use this function when you set the reduction/enlargement ratio by
yourself.
13
Press [Layout], the
LCD
Note: If [Layout] is not appeared on the
press until it appears.
NEXT
14
Select the layout using the cursor key.
15
Press [Enter] to save the layout setting.
16
Press [Enter] to save the setting.
Note: If [Enter] is not appeared on the
Note: To cancel the setting of the combine function, press [Cancel].
The Combine icon will be displayed on the
17
Set the documents.
Note: Set the documents as you see on the
If you set your documents in the
Press . After the all documents in the
START
printed.
If you set your document on
Press after set the first page of your documents on the
START
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
All manuals and user guides at all-guides.com
Combine
Use cursor to select
will show:
layout.
,
LCD
, press
LCD NEXT
Copy Ready
.
LCD
Paper
in step 3.
LCD
:
ADF
are scanned, the copies will be
ADF
glass:
FBS

Image Repeat

You can copy one document repeatedly 2, 4 or 8
2 repeats
Layout
Mode
Mod1 Mod2
Enter
8 repeats
.
Set
1
Auto
Note: In this mode, the reduce/enlarge ratio w
Combine
Setting complete
Note: According to the size of document and re
Zoom Sort
Note: When this function is available, the rota
glass.
FBS
If you want to set the reduction/enlargem
after setting the repeat function.
of the image might be lacked.
the setting direction of the document.
4 repe