Setting Passcode Polling - Muratec MFX-2570 Administrator's Manual

4
Press [Security Communication].
5
Press [Closed R
6
Select [ON] and press [Enter].
Press [OFF] to disable closed reception.

Setting Passcode Polling

If you set passcode polling, you can only perform polling with Muratec machines that also
have the same passcode set. If the passcode does not match, polling cannot be performed.
Note
To set the passcode, refer to
1
Press <Setting>.
2
Press [Management].
2-12 Closed Communication
eception].
"Setting the Passcode". (See page 2-14.)