Memory Transmission; Quick Memory Transmission - Muratec MFX-2530 Operating Instructions Manual

Fax settings

Memory transmission

Default setting: ON.
Your fax machine has a great memory! Take advantage of it, and you could:
Save Time. By using your fax machine's memory, you won't have to wait for your
machine while it completes the transmission. Simply scan your document into your
fax machine's memory, and you can walk away with your original in hand.
Save Money. If you're transmitting to another memory-equipped fax machine, your
machine will send the document directly into the other machine's memory and hang
up. (The receiving machine then prints out your message from its memory after the
call has ended.) This cuts your actual on-line time to a minimum.
Save Even More Money. Set up a delayed command (see page 3.25) to send your
document after hours, and you can save more money, because the line charges will
be cheaper.
The default transmission mode when the machine is turned on or when modes are
cleared is memory transmission. You can change this setting, see below.
Note: Whether you decide to send your documents from memory or manually, you
can override that choice one transmission at a time by pressing
MEMORY TRANSMIT
communication, your fax will return to the default setting.
Note: Some documents use up memory more quickly than others. They include
documents with many pages and those with many dark areas. When the
machine's memory is full, it can transmit only through the document feeder.
Note: When you use the flatbed scanner, the machine always uses memory trans-
mission.
To change the default setting of memory transmission:
1
Press , , 1, 3, [Enter].
MENU J
2
Select desired setting using the cursor key.
3
Press [Enter] to save the setting.
If the
MEMORY TRANSMIT
If the
MEMORY TRANSMIT
3.70
All manuals and user guides at all-guides.com
before you send your document. After completing the
light glows, memory transmission is on.
light doesn't glow, memory transmission is off.
13.Memory Tx
Use cursor to select
ON or OFF.
ON
OFF
Enter

Quick Memory transmission

Default setting: ON.
Using Quick Memory transmission can save you
missions.
For a normal memory transmission, your fax: (1
memory, (2) dials the other fax machine, then (3
But with Quick Memory transmission, your mac
into memory before dialing. After it scans the fir
machine dials the call. While dialing, connecting
machine continues to scan in the remaining pag
You can set your fax to always use Quick Memor
Important: Your fax machine's memory transm
to use Quick Memory transmissio
To make Quick Memory transmission the defau
1
Press , , 1, 8, [Enter]. The
MENU J
2
Select "On" using the cursor key.
3
Press [Enter] to save the setting.
show
LCD