Job Review; Reviewing Or Canceling A Command For View The Result Of Fax Transaction - Muratec MFX-2530 Operating Instructions Manual

Job Review

Your machine can store many "jobs" in its memory.
The Job Review function gives you the power to check on each job (or command) in
your machine's memory. It also lets you cancel a command of fax transaction if you
decide not to send the document.
You can confirm the following four items:
• Commands of the fax transaction
• 100 most recent fax transactions and result of them
• Received printing jobs for out-of-paper reception
• Reserved copy jobs
Note: When your machine is attempting to perform a command now, you can can-
cel it but cannot review other jobs.
Reviewing or canceling a command for faxing
Your machine keeps track of each command by assigning it a command number.
Delayed commands, redial attempts and current fax transmissions are all stored in
your fax machine's memory and given a command number. Your machine can store
up to 99 delayed commands. It identifies each by a two-digit command number rang-
ing from 001 to 099.
To see your machine's stored commands or to cancel them:
1
Press
JOB REVIEW & COMM CANCEL
2
If your machine is attempting to perform a command now, it appears on the
display. If you want to cancel it, skip to step 6.
Otherwise, proceed to step 3.
3
Select "Reserved Transmission" and then
press [Enter].
Note: The number next to "Reserved
Transmission" means how many com-
mands of fax transaction are reserved.
Your machine can store up to 99 com-
mands in its memory. If the number is
"000", it means there are no commands.
All manuals and user guides at all-guides.com
.
Job Review
Use cursor to select
item.
ReservedTransmission 12
Comm. Result
Out-of-paper Rx
Reserved Copy
4
The list of Reserved Transmission will appe
It will be indicated by command numbers
and time set to dial, and remote location's
names or numbers.
If the command is to send a broadcast,
"Broadcast" appears instead of the remote
tion's name or number. (For more informa
of "Broadcasting," see page 3.24.)
If the command is to send a batch transm
number (such as "B001") rather than the c
mation of "Batch transmission," see pages
If the command is for a Call group dialing
appears instead of the phone number. (For
dialing," see page 3.21.)
Note: If there are no stored commands i
5
If you want to cancel a command, select th
using the cursor key.
6
Press [Erase].
To return your machine to standby mode,
Note: See also "Reviewing or canceling parts o
Reviewing or canceling parts of a broa
You can also review or cancel certain numbers w
1
Press
JOB REVIEW
68
2
If your machine is attempting to perform
9
display. If you want to cancel it, skip to ste
5
Otherwise, proceed to step 3.
Enter
3
Select "Reserved Transmission" and th
and display "No Command" on the
.
& COMM CANCEL