Erasing Center Setting; Binding Margin Setting - Muratec MFX-2530 Operating Instructions Manual

Copy settings
B. Erasing center setting
Default setting: OFF, Erased margin: 0.1 inch
The default setting of the erased margins in the erase center function can be
changed within 0.1 – 2.0 inches in 0.1 inch steps.
1
Press , [Copy Set].
MENU
2
Select "B.Erase Center setting" and then
press [Enter].
3
To change the default setting of Erase Center,
select "Erase Center" then press [Enter].
4
Select "ON" or "OFF" then press [Enter] to
save the setting.
5
If you want to change the default value of
erased margin, select "Default" then press
[Enter].
6
Enter desired value, then press [Enter].
7
Press [Exit] or
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the Erase Center icon will be appeared
on the .
LCD
2.26
All manuals and user guides at all-guides.com
Erase Center Setting
Erase
Default
Erase Center Setting
ON
OFF
Erase Center Setting
to save the default set-
Use cursor to select
item.
Center: OFF
: Center 0.1"
Exit Enter
Use cursor to select
item.
Enter
Move cursor and enter
value. (0.1-2.0)
Document
0.1"
Default Enter
C. Binding margin setting
Default setting: OFF, Binding margins: 0 inch
The default setting of the binding space in the im
changed within 0.1 – 1.0 inch in 0.1 inch steps.
1
Press , [Copy Set].
MENU
2
Select "C.Margin Setting" and then pre
[Enter].
3
To change the default setting of the bindin
margin, select "Margin" then press [Ent
4
Select "ON" or "OFF" then press [Enter
save the setting.
5
If you want to change the default value of
ing space, select "Default" then press [En
6
Enter desired value using the cursor key,
press [Enter].
7
Press [Exit] or to save the default
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the
appeared on the .
LCD