Settings For Reception; Print Settings - Muratec MFX-2530 Operating Instructions Manual

Fax settings

Settings for reception

Print settings

You can set three parameters for printing received fax messages:
• Print reduction rate
• Reduction margin
• Paper save function
You set all three in the same procedure, discussed on next page. Following is a
explanation for each:
Print reduction rate
Print reduction lets you set the machine to reduce large incoming documents to a
size that fits the paper in your machine. (This setting doesn't affect copies you may
make with your machine.)
Below are the options for both the print reduction and copy reduction settings:
Setting What it does
Automatically reduces printouts at variable rates down to a
minimum of 50%. Tries to reduce printout to fit on one sheet of
Auto
your selected paper size. If it can't, print the image at 100% size
on two or more pages.
Does not reduce document. (Due to the sender's
100%
two pages when receiving a one-page fax document. See 97%,below.)
Reduces an original so that the final printout of a one-page-
97%
document (if the original isn't larger than the paper in your
machine) will only be one page long, even with the
91%
Reduces documents slightly more.
Reduces documents even more. Helpful for some international
81%
stationery sizes, as well as special applications.
75% Turns legal-sized originals into letter-sized printed copies.
3.72
All manuals and user guides at all-guides.com
, this may print
TTI
TTI
Reduction margin
Your fax machine's reduction margin is measure
reduction margin by explaining how it's used:
When a fax message enters your machine's elect
the message's length and compares it to (a) the
(b) the reduction margin you set. If the length o
than (a) and (b) put together, your machine prin
If it's longer, your machine prints the message o
Note: An Auto reduction setting and a reductio
Paper save function
There are two methods of paper save function, H
tion.
Half-page reception
Half-page reception can conserve paper if some o
page, "memo-sized" messages. When activated, t
combine two of these half-page receptions onto a
only combines half-page messages sent back-to-
It won't combine two half-page faxes from separ
Duplex reception (Optional duplex unit is req
With the optional duplex unit installed, received
sides of the recording paper.
Note: This feature works only when all the pa
.
print most incoming faxes as single page
then, only if you have problems with it, s
same width.