Erase Border Setting - Muratec MFX-2530 Operating Instructions Manual

Accessing the default copy setting mode
You can change or set the machine's default copy settings.
Note: Regarding the changing of the fax settings, see pages 3.69–3.76.
Note: Regarding the changing of the machine settings, see pages 4.6–4.16.
To access the copy settings:
1
Press .
MENU
2
Press [Copy Set].
Copy Settings
Use cursor to select
item.
A.Erase Border Setting
B.Erase Center Setting
C.Margin Setting
D.Sort Setting
E.User Settings
3
Select the desired settings using the cursor key, and then press [Enter].
4
Change the settings to your preference.
5
Then, press [Exit] to save the setting.
All manuals and user guides at all-guides.com
Enter
A. Erase border setting
Default setting: OFF, Erased margin: Left and
The default setting of the erased margins in the
changed within 0.2 – 2.0 inches in 0.1 inch steps
1
Press , [Copy Set].
MENU
2
Select "A.Erase Border Setting" and th
press [Enter].
3
To change the default setting of Erase Bo
select "Erase Border" then press [Enter
4
Select "ON" or "OFF" then press [Enter
save the setting.
5
If you want to change the default value of
erased margin, select "Default" then pre
[Enter].
6
Enter desired value, then press [Enter].
7
Press [Exit] or to save the default
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the
on the .
LCD