Soft Keys - Muratec MFX-2530 Operating Instructions Manual

Soft Keys

Soft Keys are shortcut keys. You can program the soft keys on the control panel to
turn on or off any function with just the touch of a button. Your machine has four
Soft Keys. If the light above any one of these keys glows, that means the setting
programmed into that key is active.
These keys are programmed at the factory to turn the following functions on or off:
• Confirmation stamp* (see page 3.71)
• Confirmation report* (see pages 3.40–3.41)
• Monitor/Call* (see page 3.5)
• Memory transmission* (see pages 3.3 and 3.70)
But instead of using the Soft Keys to control the functions above, you can program
them to turn other functions on or off. These functions are:
• TTI Tx*— Normally, when you send the fax message, your TTI will be printed at
the top of document you send. If you programmed TTI Tx into a Soft Key, you can
disable to send your TTI by simply pressing that Soft Key.
• Cover page* (see page 3.38)
• Flash* — Lets you quickly disconnect a call and go right to the next one without
having to hang up the handset.
• Security reception (see pages 3.61–3.62)
• Auto reception (see page 3.7)
• Fax Forwarding (see pages 3.36–3.37)
• Combine (see page 2.10)
• Repeat (see page 2.11)
• Series copy (see page 2.13)
• Erase Center (see page 2.13)
• Erase Border (see page 2.14)
• TopUp Copy (see page 2.14)
• Binding Margin (see page 2.15)
• Directional Magnification (see page 2.15)
• Nega/Posi (see page 2.16)
• Last Job (see page 2.17)
• Mixed length copy (see page 2.18)
All manuals and user guides at all-guides.com
• Enhanced copy (DocEnhance) — Makes only
written with pencil, darken selectively.
• Duplex (see page 2.19)
• Booklet (see page 2.23)
* When you change the setting by using the Sof
the next transmission. Once that transmissio
to its default setting.
Setting the Soft Key
1
Press , [Mach Set].
MENU
2
Select "D.Soft Key" using the cursor key,
then press [Enter].
The shows the function name current
LCD
stored in the Soft key 1.
Note: If you want to see the all four func
currently stored in the soft keys, p
[ShowAll]. However, when you re
Key, you should press [ShowAll]
3
Press desired Soft Key (1–4) on the contro
press [Enter].
Note: On the , the shaded functions a
LCD
keys.
1.Stamp
Use cursor to select
item.
Stamp Cover Page
Report Flash
Monitor/Call Security Rx
Memory Tx
Auto Rx
TTI Tx Fax Forward
CopyFunc Cancel
FaxFunc.
1.S
Com
Rep
Ser
Era
Era
Enter
Fax