Erase Border; Topup Copy - Muratec MFX-2530 Operating Instructions Manual

Advanced Copy

Erase border

Your machine can make copies with erasing the shadow at all four sides of the
recording paper.
Note: Your machine has three types of erasing shadow function, Erase Center,
Erase Border and TopUp Copy. You can use these functions at one time.
Note: The default setting of the erased margin is 0.2 inches. You can change the
default setting. (See page 2.25.)
Note: You cannot use this function with the Positive/Negative function.
1
Press .
MENU
2
Select "Erase Border" using the cursor key,
and then press [Enter].
3
Enter the upper/lower and left/right erased
margin using the numeric keypad or pressing
the and of the cursor key.
Note: You can specify the margin width as follows:
0.2" to 2.0" in 0.1" steps.
Note: To change between upper/lower and left/right, press
cursor key.
4
Press [Enter] to save the setting.
5
The Erase border icon will be displayed on the
.
LCD
6
Set your documents, then press
2.14
All manuals and user guides at all-guides.com
Erase Border
Move cursor and enter
value.
Document
R&L
0.2"
Cancel
Copy Ready
.
Erase Border
START
Setting complete
Paper

TopUp Copy

Your machine can make copies with erasing the
ment. This feature is convenient when you make
opened and the document is smaller than the pa
when you want to make a copy of half-letter size
Note: Your machine has three types of erasing
Note: This feature is available only with the
1
(0.2-2.0)
2
T&B
3
0.2"
4
Enter
5
or of the
6
Set
1
100%
Zoom Sort
Erase Border and TopUp Copy. You can
Press .
MENU
Select "TopUp Copy" using the cursor ke
and then press [Enter].
Select the document size you want.
Press [Enter] to save the setting.
The icon will be displayed on the
Set your document on the
FBS
.
START
FB
.
LCD
, then press