Muratec MFX-2530 Operating Instructions Manual page 179

The machine is not functioning as designed
Symptom Check for/What to do
The shows nothing. Is only the
LCD
The machine is in the Energy Saver mode. Press any key
on the control panel to cancel.
. . . or . . .
The power switch is turned OFF.
Turn the power switch ON.
. . . or . . .
The
or dark position.
Viewing the
sary.
Control panel keys Is only the
do not respond. The machine is in the auto power off mode.
Press
. . . or . . .
The power switch is turned OFF.
Turn the power switch ON.
The machine is not The power cord is left unplugged from the power outlet.
activated when the Plug the power cord into the power outlet.
power switch is turned
ON.
Misfeeds occur Paper size setting is incorrect.
frequently. Set the correct paper size.
Some of the selected Selected functions cannot be combined.
functions are Check the combination of functions. (See "Combination
unavailable. chart," pages
In EraseBorder or Margin is too wide. Or, margin of your document is too
EraseCenter mode, narrow.
parts of the original Set the narrower margin.
image are not copied.
All manuals and user guides at all-guides.com
key lit up green?
ENERGY SAVING
contrast volume is turned to the excessively light
LCD
, adjust the contrast volume as neces-
LCD LCD
key lit up
ENERGY SAVING
key on the control panel to cancel.
ENERGY SAVING
.4– .5.)
AI AI
?
LED
Symptom Check for/What to d
In Combine mode, Your set originals are
parts of the image are It is impossible to com
not copied or parts identical in size and d
of the copy paper are the same size paper, se
blank. and direction, and the
In Combine mode, Your originals are set
order of copies is not When you set a stack o
correct. must be on top.
When you set an origin
first page to be copied.
In Duplex copy mode, Your originals are set
order of copies is not When you set a stack o
correct. must be on top.
When you set an origin
first page to be copied.