Creating Or Modifying An F-Code Box - Muratec MFX-2530 Operating Instructions Manual

To create or modify an F-Code box:
1
Keep pen and paper with you as you follow these steps. As you decide on a
sub-address and enter it into your machine, write it down. Remember to: (1)
write down which box goes with which sub-address, (2) write down any pass-
words or . . codes you enter, (3) keep these printed records in a safe place.
I D
2
Press , , [Enter]. The
MENU N
F-Code box list.
3
Select the F-Code box you want to create or
modify using the cursor key.
Note: You can select the F-Code box by
directly entering that two-digit identi-
fier number (01-50).
Note: You can press [Detail] to see the number which has been pro-
grammed in that speed-dial number.
4
Press [BoxSet].
What you do next depends on whether you're
creating or modifying the F-Code box:
If creating — skip to step 6.
If modifying — the
LCD
proper . . code. The
I D LCD
5
Use the numeric keypad to enter the 4-digit
code (not the - sub-address and not the
ITU T
[Enter].
• If you modifying the Security box, go to step 7.
• If you modifying the Bulletin box, skip to step 16.
• If you modifying the Relay box, skip to step 28.
Note: You cannot change the type of an existing F-Code box. If you're modi-
fying an existing F-Code box and want to change the box type, you
first must erase the old box, then create a new one.
6
The fax machine is asking which box type you
want to assign to this box — bulletin, security
or relay.
Select desired box type using the cursor key
and then press [Enter].
• If you chose Security, go to step 7.
• If you chose Bulletin, skip to step 16.
• If you chose Relay, skip to step 28.
All manuals and user guides at all-guides.com
N.F-Code Box
Enter box number. (01-50)
shows the
LCD
01:
02:
03:
04:
05:
Detail EraseBox Set Box
01:Security Box
Enter I.D.code
****
01:AABBCC
02:DDEEFF
03:GGHHII
04:
asks you to enter the
05:
shows (see right):
. .
I D
- password) and then press
ITU T
01:Not Stored
Security Box
Bulletin Box
Relay Box
SetBox
Enter
Use cursor to select
box type.
Enter
If you chose Security:
7
The security box has the following setting
• Box Name – You can enter the name f
this F-Code box.
• - sub-address – This is the nume
ITU T
identifier you must enter in order to co
nicate with any remote F-Code compat
fax.
• - password – This is the passwor
ITU T
transactions. You don't need to have a
However, using a password will make y
more secure.
• Hold time – This setting is how long y
in your machine's F-Code box.
• . . code for this F-Code box – This
I D
box's security, which you use to (1) prin
compatible fax sends to this F-Code bo
make any changes to this F-Code box.
8
To enter the Box name:
Select "Box Name" using the cursor key,
Then, enter the name the same way you e
EasyStart. An F-Code box's name can be u
Note: To erase characters, press [Clear]
To change just one character in th
character and then press [Clear]
correctly.
Press [Enter] to save the box's name and
9
To enter the - sub-address:
ITU T
Select "Sub-Address" using the cursor k
Then, use the numeric keypad to enter th
this F-Code box.
The sub-address can be up to 20 character
nation of numbers and the * and # charac
characters).
Note: No other F-Code box in this mach
as the one you enter here.