Series Copies; Erase Center - Muratec MFX-2530 Operating Instructions Manual

Series Copies

You can make one-sided copies from two facing pages of book documents.
Note: In this mode, the reduce/enlarge ratio will be set to "Auto" (automatically).
If you want to set the reduction/enlargement ratio manually, set the ratio
after setting the series copies function.
Note: According to the size of document and recording paper you selected, a part
of the image might be lacked.
Note: This feature is available only with the
1
Press .
MENU
2
Select "Series Copy" using the cursor key, and
then press [Enter].
3
Select the bound side of the book document
using the cursor key.
If your book document type is read from left to
right, select "L".
If your book document type is read from right to left, select "R".
4
If you want to change the recording paper size, proceed to next step.
Otherwise, skip to step 6.
5
Press [Paper] to select the paper size, and then press [Enter].
6
Press [Enter] to save the setting.
7
The Series copy icon will be displayed on the
.
LCD
8
Set the documents on
FBS
.
START
All manuals and user guides at all-guides.com
.
FBS
Series Copy
Use cursor to select.
Paper
Copy Ready
glass and press
Paper

Erase center

Your machine can make copies with erasing the
ing paper.
Note: Your machine has three types of erasing
Note: The default setting of the erased margin
Ratio:Auto
Orig.bound
L R
Paper
Letter
Cancel Enter
Set
1
Auto
Series Copy
Setting complete
Zoom Sort
Erase Border and TopUp Copy. You can
default setting. (See page 2.26.)
1
Press .
MENU
2
Select "Erase Center" using the cursor k
and then press [Enter].
3
Enter the center erased margin using the
numeric keypad or pressing the
cursor key.
Note: You can specify the margin width
0.1" to 2.0" in 0.1" steps.
4
Press [Enter] to save the setting.
5
The Erase center icon will be displayed on
.
LCD
6
Set your documents, then press
and
.
START