Settings For Dialing; Changing The Dialing Pause Length; Changing Redial Settings - Muratec MFX-2530 Operating Instructions Manual

Settings for dialing

Changing the dialing pause length

Default setting: 2 sec.
The pause is set by the factory to last two seconds, but you can set it to last as long
as ten seconds if necessary. To change the pause length:
1
Press , , 0, 4, [Enter].
MENU J
2
Use the numeric keypad to enter the length you
want for the dialing pause.
Note: The length setting requires two digits.
Always enter a leading zero for lengths
less than 10 seconds.
3
Press to save the setting.
ENTER
All manuals and user guides at all-guides.com
04.Dialing Pause
Set dialing pause. (02-10)
02 sec.
PauseTime: 2 sec. (02-10)

Changing redial settings

Default setting: Number of redial: 2 times, Red
It's up to you how many times the fax redials a n
between redials (that length of time between cal
To program the redial settings:
1
Press
MENU
2
Use the numeric keypad to enter the num
redials you want. Choose from 2 to 15 red
Note: Enter a leading zero when enterin
Enter
3
Press [Enter] to save the setting.
4
Use the numeric keypad to enter the leng
want between redial attempts. Choose fro
5 minutes.
5
Press [Enter] to save the setting.
6
Press
RESET
, , 0, 6, [Enter].
J
quantity less than 10.
to return to standby mode.