Binding Margin; Adjust The Binding Margin - Muratec MFX-2530 Operating Instructions Manual

Binding Margin

You can make a binding margin on the copy by shifting the image to left, right,
upper or lower.
Note: You can set the desired margin between 0.1 and 1.0 inch, however, if you set
the margin too large, a part of the image might be lacked.
Note: The default setting of binding margin is 0.0 inch. You can change this
default setting. (See page 2.26.)

Adjust the binding margin

1
Press .
MENU
2
Select "Margin" using the cursor key, and then
press [Enter].
3
To adjust the top and bottom margin (to move
the image upper or lower) by pressing pressing
or of the cursor key.
4
To adjust the left/right margin (to move the
image left or right) by pressing
5
Press [Enter] to save the setting.
6
The Margin icon will be displayed on the
7
Set your documents, then press
All manuals and user guides at all-guides.com
Margin
Use cursor to set
bind margin. (0.1-1.0)
Top
0.0"
Bottm
0.0"
Cancel
or of the cursor key.
Copy Ready
.
LCD
.
START
Margin
Setting complete
Paper
Directional mag
Directional ratio(%) magnifica
You can copy with different magnification ratios
Note: You can enter the ratios from 25% throu
1
2
3
Right
0.0"
Left
4
0.0"
Enter
5
Set
1
100%
6
7
Zoom Sort
With some ratios you entered, a part of t
blank margins will appear on copies.
Press .
MENU
Select "D. Mag." using the cursor key and
Enter the desired vertical ratio using
the cursor key or numeric keypad. Then, p
or of the cursor key.
Enter the desired horizontal ratio using
of the cursor key or numeric keypad.
Note: To change number you entered, pr
or of the cursor key, then enter
Press [Enter] to save the setting.
The D.Mag. icon will be displayed on the
Set your documents, then press
Horiz
o
L
.
START