Using Call Group - Muratec MFX-2530 Operating Instructions Manual

Phoning via speed-dial
To make a phone call using a speed-dial number, you must have an optional handset
attached to your machine. To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press /
MONITOR CALL
2
Press /
SPEED DIAL TEL INDEX
3
Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial.
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed using the monitor speaker, pick up the handset to speak to the
person that answers.
Note: If the call fails, and you used
hang up.
All manuals and user guides at all-guides.com
to use the monitor speaker
.
/ to dial, press
MONITOR CALL

Using call group

If you frequently send the same fax message to m
group number into your autodialer. (If necessary,
"Using speed-dialing", in previous pages.)
After you store the group number, you can send t
tions. For example, one call group may include al
group may include all of your employees and ano
Your machine can:
• Store as many as 300 numbers in up to 32 ca
• Store one number in as many as 32 different
Send a fax via call group
Note: The group number dialing can be used o
/ to
MONITOR CALL
1
Place the document and the select resolut
2
Press [Group].
3
Use the numeric keypad to enter the group
number you want to use to send a fax.
Note: If you want to send a fax to severa
groups at a time, press [Broadcas
then repeat steps 2-3. You can also
either a one-touch key, speed-dial n
4
Press .
START