Muratec MFX-2530 Operating Instructions Manual page 65

05. Image Compression Mode
Default setting: NORM
You can compress the scanned image and store it in memory. When you select HIGH
in this setting, you can store more documents in the memory.
Note: When you select HIGH, the scanning speed will be slower.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "05. Image Compress Mode" and then
press [Enter].
4
Select the mode you want.
If you want to store more documents in the
memory, select HIGH.
If you want to make the scanned speed to be
faster, select NORM.
5
Press [Enter] to save the setting.
6
Press to return to standby.
RESET
All manuals and user guides at all-guides.com
User Settings
Use cursor to select
item.
01.Copy Scan Setting
02.Separator Line Width
03.Copy Panel Reset
04.CopyAgain Hold Time
05.Image Compress Mode
05.Image Compress Mode
Use cursor to select
item.
NORM: make copies faster
HIGH: fit more in memory
06. Cassette for copying
Default setting: 1st cassette: ON, 2nd cassette:
If you do not want to use certain cassette for cop
1
Press
MENU
2
Select "E. User Settings" and then press
3
Select "06. Cassette for Copy" and then
[Enter].
Enter
4
Select the cassette you want to set using t
cursor key and then press [Enter].
Enter
5
Select "ON" or "OFF" using the cursor key
6
Press [Enter] to save the setting.
7
If you want to set other cassette, repeat st
4–6.
To finish, press [Exit].
Press
RESET
, [Copy Set].
to return to the standby mod