Muratec MFX-2530 Operating Instructions Manual page 115

18
To enter the - sub-address:
ITU T
This is same procedure in step 9. Please refer to step 9.
19
To enter the - password:
ITU T
This is same procedure in step 10. Please refer to step 10.
20
To set the Rx Protect:
Select "Rx Protect" using the cursor key, and then press [Enter].
Then, select desired setting "On" or "Off".
On: Do not open this box to receive documents from callers.
Off: Open this box to receive documents from callers.
Press [Enter] to save the box's name and continue.
21
To set the Auto Print:
Note: This setting is available only when the reception protection (Rx pro-
tect) setting is set to off (see step 20).
Select "Auto Print" using the cursor key, and then press [Enter].
Then, select desired setting "On" or "Off".
On: Print the document automatically when the box receives it.
Off: Print the document manually, when you want to print it.
Press [Enter] to save the box's name and continue.
22
To set the Overwrite Doc:
Note: This setting is available only when the reception protection (Rx pro-
tect) setting is set to off (see step 20).
Select "Overwrite Doc" using the cursor key, and then press [Enter].
Then, select desired setting "On" or "Off".
On: When your machine receives a new document into this box, it will erase
any documents currently stored in it.
Off: When your machine receives a new document into this box, it will not
erase the documents stored in it. Your machine can store up to 30
documents (each document can include one or more pages) in each box.
Press [Enter] to save the box's name and continue.
All manuals and user guides at all-guides.com
23
To set the Erase Tx Doc:
Select "Erase Tx Doc" using the cursor k
Then, select desired setting "On" or "Off".
On: Your machine erases the document fr
you choose "On", this box can be polle
Off: Your machine does not erase a docum
As long as your machine holds
ment from the box, the document is a
24
Press [Exit].
The machine asks for your F-Code box's fo
digit security . . code. This is the
I D
the box's security, which you use to (1) pri
document any remote F-Code-compatible
sends to this F-Code box or (2) you enter b
you can make any changes to this F-Code
25
Decide on a four-digit .
I
Write it down, and put it in a safe place.
Important: Do not use 0000 as an
26
Use the numeric keypad to enter the four-
Important: After completing this step, y
this F-Code box. Be sure to
27
Press to save the F-Code box inform
ENTER
To create or modify another F-Code box, g
To finish, press .
RESET
pow
AC
. . code
I D
. code (0001-9999
D
. . co
I D