Basic Procedure - Muratec MFX-2530 Operating Instructions Manual

Basic copy

Basic procedure

1
Make sure the machine is in the Copy mode. To change to the Copy mode,
press .
COPY
2
Press to clear the previous setting, if necessary.
RESET
3
Set your document on
Note: See "How to set the document" on page 1.19 for details.
4
Set any settings you want.
5
If you want to make only one copy of each page of the document, skip to step
7. Otherwise, proceed to step 6.
6
Use the numeric keypad to enter the desired number of copies for each page
in your document. You can set up to 99 copies.
Note: To change the number entered, overwrite it with new number.
7
Press to begin the copying process.
START
Note: To stop the machine during multi-copying, press
Note: To return the machine to the initial condition after copying, press
Note: By default, your machine make a copy with the following conditions:
Document type: Auto
Image contrast: Auto
Paper selection: Auto
Reduce/Enlarge ratio: 100%
Note: If you do not operate the machine for a certain period after copying, the
machine returns to the initial display and after a certain period, it resets
the any setting to the default. This is called "Auto Reset". You can change
the auto reset time. (See page 2.28.)
2.4
All manuals and user guides at all-guides.com
or glass.
ADF FBS
.
STOP
.
RESET