Changing The Paper Size - Muratec MFX-2530 Operating Instructions Manual

Getting started
4
Adjust the side guide and the rear
guide for the paper by sliding them.
Note: Slide the side guide by press-
ing the green part.
Slide the rear guide by press-
ing both sides of it.
5
Close the cassette.
Loading the large capacity cassette (Option)
1
Pull the cassette toward you.
2
Push down the bottom plate inside the cassette so it clicks and the plate and
the bottom of the cassette are even.
3
Insert the paper into the cassette
along the right side with face up.
Note: Make sure the stack of paper
isn't higher than the limit
mark.
4
Insert the paper into the cassette
along the left side with face up.
Note: Make sure the stack of paper
isn't higher than the limit
mark.
5
Close the cassette.
1.10
All manuals and user guides at all-guides.com

Changing the paper size

You should tell the paper size to the machine, w
the paper size after loading new papers in the ca
Note: When you want to change the paper size
cassette, please contact your authorized
Changing the paper size of the multi
You can change the paper size of the multi purp
guides in the cassette (see page 1.9).
To set the paper size:
1
When you put papers in the cassette, the
shows:
When using the standard paper size:
(1) Select the paper size using the cursor key
(2) Press [Enter].
When using the non standard paper size:
(1) Press [Other].
(2) Select the paper size using the cursor key
(3) Press [Enter].
Note: If you want to go back to the stand
paper select display, press [Stand
When using the special sized paper:
(1) Press [Other].
(2) Select "Custom" using the cursor key.
Note: You can register three types of spe
size as you want.
(3) Press [Enter].
(4) Enter the horizontal and vertical size of t
Note: You can also enter the paper size
Note: To change Horizontal / Vertical, us
(5) Press [Enter].