Setting Security Transmission - Muratec MFX-2530 Operating Instructions Manual

Advanced fax
Performing batch transmission while using the
Note: The following instructions presume you are familiar with how to set and use
both your machine's autodialer and its batch transmission feature. If you
need to review, see pages 3.11–3.23 for more on the autodialer and/or pages
3.26–3.28 for more on batch transmission.
If you've specified Mode 1 or Mode 2
Important: Any autodialer number you use with batch transmission must include
the . (To review how to include this information in an autodialer
PIN
number, review the Mode 1 instructions under "Autodialing while
using the
PIN
Before sending a batch transmission the first time, you must store the
batch box. Here's how:
1
Follow the steps for creating or modifying a
batch box (page 3.26).
The asks for the fax number (here, we're
LCD
working with batch box 1):
2
Enter an autodialer number, or use the numeric
keypad to enter the fax number, to which the
batch transmission should go.
Important: If you're entering a number from the numeric keypad, enter the
fax number, followed by the * ("star") key and then the
3
Press [Enter] to save the setting.
Note: If you press [Enter] without entering the
indicates "No
4
Continue with the steps for creating or modifying a batch box (page 3.26).
Now you can perform batch transmission to this box while the
3.64
All manuals and user guides at all-guides.com
mask," page 3.63.)
1:
Enter fax number.
1234*1234567 _
Tx Time :
PIN
Number" on the and then returns you to step 2.
PIN LCD
mask
PIN
within its
PIN
- Clear Enter
.
PIN
, the fax machine beeps,
mask is activated.
PIN

Setting security transmission

Your fax's security transmission feature provides e
go where you're sending them. When this feature i
fax, the machine compares the last four digits of th
Subscriber (the phone number at the top of that
ID
match, your call goes through. If they don't, your m
prints an error message telling you to check the co
Before you activate this feature, consider:
• Not all fax machine owners enter their phone
Indeed, some machines don't even have a Sub
mission activated, your machine would disco
• Access codes can cause confusion. — If an auto
or other access codes, activating this feature
Note: In the following instructions, your fax's
1
Press , , 1, 0, [Enter].
MENU J
2
Select desired setting.
3
Press [Enter] to save the setting.
L