Muratec MFX-2530 Operating Instructions Manual page 184

Just in case
Q: Can I transmit a document that's extra long?
A: Yes, if the receiving fax machine is equipped to handle long documents. Many
machines have a special setting which allows them to receive documents that
exceed the normal length.
Q: Can I transmit a page from a newspaper?
A: No. A newspaper page can jam in your document feeder. First, use a copy
machine to make an appropriately sized copy of the newspaper page, then
transmit the copy.
Q: Can I transmit a page with correction fluid on it?
A: Yes, but only if the fluid is completely dry before you begin transmission.
Q: How can I be sure my fax was received?
A: Set your machine to print a confirmation report after each transmission (see
pages 3.40–3.41).
Q: I don't want to install a dedicated phone line for my fax machine, so I've con-
nected the machine to a
ring. How do I prevent this?
A: Call your manufacturer or telephone company for assistance. They may be
PBX
able to convert one of the
Q: Sometimes when I dial a fax call by using either the optional handset or
/ , I don't hear the fax receiving tones from the other machine.
MONITOR CALL
Am I doing something wrong?
A: When this happens, try pressing
handset if you're using it), as usual. It's possible you're calling an older, non-
standard fax machine that doesn't emit answering tones. Even a few Group 3
faxes (see "Glossary," page
sound a receiving tone. After you transmit, call the person at the other fax
machine's location to see if that person got your document.
Q: I inserted a document in the feeder and dialed a fax number, but my machine
didn't transmit the document. Instead, "** Auto Redial **" now appears on
my . What does this mean?
LCD
A: The remote fax machine was busy, so your machine will try the call again, auto-
matically. As long as it hasn't stored more than 99 delayed commands (counting
automatic redials), your machine should still accept commands from you. If it
has exceeded this quantity and will accept no more commands, try cancelling
one of the delayed commands (see page 3.29). If the machine still won't cooper-
ate, keep cancelling commands until it does.
5.20
All manuals and user guides at all-guides.com
phone system. When I get a fax call, all the phones
PBX
lines for use only by your fax machine.
PBX
(and then hanging up the optional
START
.7) on the market sound a sending tone but don't
AI
Q: The specifications (page
when I transmit a page it can take much lo
A: We base this specification on transmission
ment called - Test Document 1 (sometim
ITU T
Fax manufacturers use this method to test
• The pages you send may be darker, or oth
than - Test Document 1.
ITU T
• The transmission time measured for test
shake time — the time during which two
themselves to each other and "agree on"
• The specification time is based on the us
may be using fine, superfine or grayscale
longer than normal mode.
Q: What's a default?
A: A default is a setting that your machine wi
programmed. For example, you can set the
fax by using its memory. If you set this acti
machine will always send a fax, until you te
Reports
Q: I called the number 011-555-555-1212, but
transmit confirmation report (
can I be sure my document went to the righ
A: The numbers you enter using the fax keypa
ory "buffer", and it's only the last part of the
"remembers." An easy way to avoid getting
your printouts is to store your most frequen
or speed-dial numbers. These autodialer nu
on your .
TCR
.2) list an averag
AI
). Why did
TCR