Default Slope Policy Values; Table 47: Slope Policy Defaults - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Default Slope Policy Values

The default access egress and network egress policies are identified as policy-id "default". The
default policies cannot be edited or deleted. The following table displays default policy
parameters:

Table 47: Slope Policy Defaults

description
high (RED) slope
Administrative state
start-avg
max-avg
max-prob
low (RED) slope
Administrative state
start-avg
max-avg
max-prob
non-TCP (RED) slope
Administrative state
start-avg
max-avg
max-prob
A:ALA>config>qos# slope-policy default
A:ALA>config>qos>slope-policy# info detail
----------------------------------------------
7210 SAS M OS Quality of Service Guide
Field
description "Default slope policy."
queue "1"
high-slope
shutdown
start-avg 70
Default
Default slope policy
shutdown
70% utilization
90% utilization
75%
shutdown
50% utilization
75% utilization
75%
shutdown
50% utilization
75% utilization
75%
Slope QoS Policies
Page 395