Omron CJ1W-EIP21 Operation Manuals page 67

 Using BOOTP
1
Use the Sysmac Studio to set the initial settings of the EtherNet/IP
Function Module.
• Set the BOOTP settings.
2
Check operation.
• Check the event log to see if BOOTP started.
• Check online status with the device variables for the CJ-series Unit.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
↓
1 Introduction
Section 5 Sysmac Studio
Settings for the EtherNet/IP
Unit
1-25
1