11 SNMP Agent
Name
tcpConnTable
tcpConnEntry
tcpConnState
tcpConnLocal-
Address
tcpConnLo-
calPort
tcpConnRe-
mAddress
tcpConnRem-
Port
tcpInErrs
tcpOutRsts
11-16
Standard [(identifier) attribute]
(13) NA
The information table specific to the TCP connec-
tion.
(1) NA
Entry information related to a specific TCP con-
nection. This value is deleted if the connection
changes to the CLOSE state. The indices are tcp-
ConnLocalAddress, tcpConnLocalPort, tcpCon-
nRemAddress, and tcpConnRemPort.
(1) RW
The status of the TCP connection.
closed(1)
listen(2)
synSent(3)
synReceived(4)
established(5)
finWait1(6)
finWait2(7)
closeWait(8)
lastAck(9)
closing(10)
timeWait(11)
(2) RO
The local IP address of this TCP connection. A
value of 0.0.0.0 is used for connections in the LIS-
TEN state that accept connections from any IP
interface related to the node.
(3) RO
The local port number for this TCP connection.
(4) RO
The remote IP address for this TCP connection.
(5) RO
The remote port number for this TCP connection.
(14) RO
The total number of error segments received
(TCP checksum errors, etc.).
(15) RO
The number of segments sent with the RST flag
(the number of times the TCP connection was
reset).
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Sup-
Implementation
port
specifications
---
According to the
standard.
---
According to the
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.
Sup-
According to the
ported.
standard.