Omron CJ1W-EIP21 Operation Manuals page 382

Appendices
Windows Vista or Windows 7
Use the following procedure to change the settings. Always perform steps 1 to 6 if you cannot go online.
The User Account Control Dialog Box may be displayed during this procedure. If it appears, click the
Continue Button and continue with the procedure.
1
Select Control Panel from the Windows Start Menu and change the display to Classic View.
2
Open the Administrative Tools and select Windows Firewall with Advanced Security from the
dialog box that is displayed.
3
Select Inbound Rules under Windows Firewall with Advanced Security on Local Computer on
the left side of the Windows Firewall with Advanced Security Dialog Box.
4
Select New Rule under Inbound Rules in the Actions Area on the right side of the dialog box.
5
Make the following settings for each step in the New Inbound Rule Wizard Dialog Box, and click
the Next Button to move between steps.
Rule Type
Program
Protocol and support
Scope
Action
Profile
Name
6
Click the Finish Button. The rule that you defined will be registered in the Inbound Rules (e.g.,
Omron_EIP).
Close the Windows Firewall with Advanced Security Dialog Box.
7
When you attempt to connect to the NJ-series CPU Unit from the Network Configurator, the
Windows Security Warning Dialog Box is displayed.
A-8
Select Custom.
Select All Programs.
Select ICMPv4 as the protocol type.
Select Any IP address for everything.
Select Allow the connection.
Select Domain, Private, and Public.
Enter any name, e.g., Omron_EIP.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)