Snmp Trap Settings Display - Omron CJ1W-EIP21 Operation Manuals

5-7

SNMP Trap Settings Display

 SNMP Trap
Setting
SNMP trap
*1
Port No.
*1 The following ports are used by the system and cannot be set by the user: 53, 68, 123, 161, 2222, 9600, and
44818.
Additional Information
Refer to 11-1-1 Overview for details on the SNMP trap.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
5 Sysmac Studio Settings for the EtherNet/IP Unit
Description
Specify whether to use the SNMP trap (network error detection).
If the SNMP trap service is not enabled, SNMP traps are not sent to the
SNMP manager.
Set the port number to use to connect to the SNMP server.
It is normally not necessary to change this setting.
5
Default
Do not use.
0 (port No. 162)
5-11