Omron CJ1W-EIP21 Operation Manuals page 256

9 FTP Server
• Files on the SD Memory Card are stored in the MEMCARD directory under the root directory (/).
• The root directory (/) is the directory that is used when you log onto the EtherNet/IP Unit.
The MEMCARD directory does not exist if an SD Memory Card is not inserted in the CPU Unit or
if the SD Memory Card power indicator on the CPU Unit is not lit.
type
 Format
type data_type
 Function
• Specifies the file data type.
• The following data types are supported:
ascii: Files are transferred as ASCII data.
binary (image): Files are transferred as binary data. The CPU Unit handles binary files. Use the
type command to specify binary transfers before you upload or download files. File contents can-
not be guaranteed if transferred as ASCII data.
• The default file type is ASCII.
get
 Format
get file_name [receive_file_name]
 Function
• Transfers the specified remote file from the SD Memory Card to the local host.
• A receive file name can be used to specify the name of the file in the local host.
mget
 Format
mget file_name
 Function
• You can include wildcards (*) in the file name to transfer multiple remote files from the SD Memory
Card to the local host.
put
 Format
put file_name [destination_file_name]
 Function
• Transfers the specified local file to the remote host (to the SD Memory Card).
• You can specify the destination file name to specify the name the file is stored under on the SD
Memory Card.
• Any existing file with the same name in the remote host (on the SD Memory Card) is overwritten
by the contents of the transferred file.
9-10 CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)