Omron CJ1W-EIP21 Operation Manuals page 342

13 Troubleshooting
Connection status
General Additional
Status
(hex)
01 031C
08 ---
D0 0001
D0 0002
13-24
Source of error
Status
(hex)
Error code generated in origi-
nator:
Some other error occurred.
Error code returned from tar-
get:
There is no Forward Open or
Large Forward Open service
in the target device.
Error code generated in origi-
nator:
The connection operation is
stopped.
Error code generated in origi-
nator:
The connection is being
opened (opening processing
in progress).
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Handling
Configuration Configuration
1 2
This error does The originator
not occur. generates this
code when an
unsupported
response code
is returned from
the target in
reply to a con-
nection-open-
ing request.
This error does Depends on
not occur. the target's
specifications.
(Contact the
target device's
manufacturer.)
The connec- The meaning of
tion was this error code
stopped is defined by
because the each vendor, so
Tag Data Link it depends on
Stop Bit was the target's
changed to specifications.
TRUE, or the (Contact the
settings data is target device's
being down- manufacturer.)
loaded.
Either change
the Tag Data
Link Start Bit to
TRUE, or wait
until the set-
tings data has
been down-
loaded.
Includes Con-
troller stop
errors, Unit fail-
ure. To handle
these errors,
refer to 13-2-1
Errors Occur-
ring at the Eth-
erNet/IP Unit.
Wait until the The meaning of
opening pro- this error code
cessing is com- is defined by
pleted. each vendor, so
it depends on
the target's
specifications.
(Contact the
target device's
manufacturer.)
Configuration
2
Depends on
the originator's
specifications.
(Contact the
originator
device's manu-
facturer.)
Depends on
the originator's
specifications.
(Contact the
originator
device's manu-
facturer.)
Depends on
the originator's
specifications.
(Contact the
originator
device's manu-
facturer.)
Depends on
the originator's
specifications.
(Contact the
originator
device's manu-
facturer.)