Dimensions - Omron CJ1W-EIP21 Operation Manuals

 Node Address Setting Switch
The Node Address Setting Switch sets the node address of the EtherNet/IP Unit.
1
X16
Setting method
Two-digit hexadecimal
Note The node address is factory-set to 01. With the default settings, the values set on these switches become
the last two digits of the IP address of the EtherNet/IP Unit.
Default IP address = 192.168.250.node address
With the factory-default node address setting of 01, the default IP address is 192.168.250.1.
The node address can be set to any number in the setting range (01 to FE), as long as the same
address is not set on another node in the network.
Additional Information
• If the node address setting is changed during operation, the MS Indicator will flash red.
1-3-3

Dimensions

• CJ1W-EIP21
90 mm
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
0
X16
Setting range
01 to FE
31 mm
EIP21
MS
NS
COMM
100M
10M
UNIT
4
No.
NODE
4 4
No.
1 0
x16
x16
IP ADDRESS
192.168.250.1
SUBNET MASK
255.255.255.0
100BASE-TX
10BASE-T
1 Introduction
65 mm
1
1-15