Omron CJ1W-EIP21 Operation Manuals page 280

11 SNMP Agent
Subtree name
ipAddrEntry
ipAdEntAddr
ipAdEntIfIndex
ipAdEntNet
Mask
ipAdEntBcas-
tAddr
ipAdEn-
tReasmMax-
Size
ipRouteTable
ipRouteEntry
ipRouteDest
ipRouteIfIndex
11-10
Standard [(identifier) attribute]
(1) NA
Row data of address information for IP addresses.
The index is ipAdEntAddr.
(1) RO
The IP address.
(2) RO
The index value of the interface that this entry
applies to.
This is the same value as ifIndex.
(3) RO
The subnet mask for the IP address of this entry.
(4) RO
The value of the least significant bit of the address
when an IP broadcast is sent. An address repre-
sented by all 1 bits is used for broadcasting as an
Internet standard. In that case, this value is always
1.
(5) RO
The maximum IP packet size that can be reas-
sembled from IP fragmented input IP datagrams
received through the interface.
(21) NA
The IP routing table for this entity.
(1) NA
Route information for a specific destination.
The index is ipRouteDest.
(1) RW
The destination IP address for this route. A value
of 0.0.0.0 for this entry indicates the default route.
(2) RW
The ID number of the interface required to send to
the next destination host in this route. This ID
number is the same number as ifIndex, which is
used to identify the interface.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Sup- Implementation
port specifications
--- ---
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
--- ---
--- ---
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.