5
Click the OK Button.
Select the network to connect to.
Connections through NJ-series CPU Unit's USB Port
Use the following procedure to connect to the EtherNet/IP Unit via the USB port on the CPU Unit.
1
Select the communications interface.
Select Option
2
Select TCP:2 and then click the OK Button.
3
Select the network to connect.
4
The Network Configurator will connect to the EtherNet/IP network. If the Network Configurator
goes online normally, "On-line" is displayed in the status bar at the bottom of the window.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
−
−
Select Interface
NJ Series USB Port.
7 Tag Data Link Functions
7
7-49