Omron CJ1W-EIP21 Operation Manuals page 279

Subtree name
ipOutNoRoutes
ipReasmTimeout
ipReasmReqds
ipReasmOKs
ipReasmFails
ipFragOKs
ipFragFails
ipFragCreates
ipAddrTable
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
Standard [(identifier) attribute]
(12) RO
The number of IP datagrams that were discarded
because there was no transmission path. This
counter includes datagrams that attempted to be
sent through ipForwDatagrams, but were dis-
carded because they were set with no-route. This
value indicates the number of datagrams that
could not be transferred because the default gate-
way was down.
(13) RO
The maximum number of seconds to wait to
receive all IP datagrams for reassembly if a frag-
mented IP datagram is received.
(14) RO
The number of IP datagrams received that require
reassembly. There is a flag in the IP header that
indicates if the datagram is fragmented. You can
use that flag to identify fragments.
(15) RO
The number of IP datagrams received that were
successfully reassembled.
(16) RO
The number of IP datagrams received that were
not successfully reassembled.
(17) RO
The number of IP datagrams that were success-
fully fragmented.
(18) RO
The number of IP datagrams that were not suc-
cessfully fragmented. (For example, because the
Don't Fragment flag was set for the IP datagram.)
(19) RO
The number of IP datagrams created as a result of
fragmentation.
(20) NA
An address information table for IP addresses.
11 SNMP Agent
Sup- Implementation
port specifications
Sup- According to the
ported. standard.
Sup- 60 s
ported.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
Sup- According to the
ported. standard.
--- ---
11-9
11