Omron CJ1W-EIP21 Operation Manuals page 157

17
If you want to just add new tags and register the tag set, first register the tags with steps 1 to 9.
In this example, input tags Var_In_e, Var_In_f are newly added.
18
After you register all of the required tags, click the OK Button at the bottom of the Edit Tags Dia-
log Box.
19
At this point, a confirmation dialog box is displayed to check whether the registered tag names
are used as the tag set names. Tags are just added in this case, so click the No Button. Just the
tags are registered. The tags are not registered as tag sets.
20
To register the newly added tags in a tag set, either double-click the desired tag set, or select
the tag set and click the Edit Button.
The Tag List on the left side of the dialog box shows the tags that are already registered, and the
Candidate Tag List on the right side of the dialog box shows the other tags that are not regis-
tered yet.
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
7 Tag Data Link Functions
7
7-27