Connection Over Wire-Pressed Terminal Cable; Specifications Of Wire-Pressed Terminal Cable; Assembly Of Connector For Wire-Pressed Terminal Cable - Panasonic FP7 User Manual

3.3 Connection over Wire-pressed Terminal Cable

3.3.1 Specifications of Wire-pressed Terminal Cable

This is a connector that allows loose wires to be connected without removing the wire's
insulation. A pressure connection tool is required to connect the loose wires.
 Suitable wires (strand wire)
Size Nominal cross-sectional area
AWG#22 0.3 mm
AWG#24 0.2 mm
 Connector for wire-pressed terminal cable (provided with the unit)
Manufacturer
Panasonic made
(Note): One set is provided for the product. If you need more connectors, purchase AFP2801 (2 sets/pack).
 Pressure connection tool
Manufacturer
Panasonic made

3.3.2 Assembly of Connector for Wire-pressed Terminal Cable

The wire end can be directly crimped without removing the wire's insulation, saving labor.
(Procedure)
1. Bend the contact back from the carrier, and set it in the pressure connection tool.
2
2
Composition of parts
Housing (40P)
Semi-cover (40P)
5-pin contact (for AWG #22 and #24)
Product no.
AXY52000FP
3.3 Connection over Wire-pressed Terminal Cable
Insulation thickness
1.5 to 1.1 dia.
Required quantity
1 x 1 set
2 x 1 set
8 x 1 set
Rated current
3 A
3-11