Panasonic FP7 User Manual page 221

 Input setting (Input time constant high resolution)
Unit
memory no.
Name
（Hex）
Input time
UM00070 constant setting
(X0-X7)
Input time
UM00071 constant setting
(X8-XF)
Allocation of unit memories
UM no.
Bit no. b15-b12
I/O number
Input time XF,XE
constant
Setting value
H F
Initial value
(Hex)
The value (Hex) of input time constant (for two inputs) is written to the four bits of the unit
memory. When allocating them using the tool software, it is not necessary to write them.
Setting
Valid/Invalid
value
H0
H1
H2
H3
Valid
H4
H5
H6
H7
Invalid
H8-HF
Precautions when making settings with programs
• When the setting value is that in the range of H8 to HF, the setting is invalid.
• When the setting value is that in the range of H0 to H7, the input time constant setting is
given priority over UM100-UM101.
• On the unit Ver.1.0x, the above input time constant values (the setting area of unit memories
UM00070 and UM00071) cannot be set with the tool softwrae (FPWIN GR7).
When the above input time constants are set in the tool software for the unit Ver.1.0x, they
are set as 2 µs. These values can be set by writing them into the unit memories using
programs.
Default
H FFFF
H FFFF
UM00071
b11-b8 b7-b4
XD,XC XB,XA
HF HF
Input time
constant
Effective
pulse width
0.5 µs
1.5 µs
32 µs
64 µs
96 µs
128 µs
256 µs
8 ms
-
13.4 Unit Memory Detailed Information
Setting range and description
Set values indicating input time constant (high
resolution).
b3-b0 b15-b12 b11-b8
X9,X8 X7,X6
HF HF
UM000070
b7-b4 b3-b0
X5,X4 X3,X2
HF HF
R W
A A
X1,X0
HF
13-29