Panasonic FP7 User Manual page 45

 Setting example of output terminal polarity
• By default, "Output OFF" is selected.
• For using the unit like a general digital output unit, select "Sink output" for all points or
"Source output" for all points in "Output terminal polarity".
• The output formats can be mixed by four circuits.
Example 1 of using sink and source outputs
Example 2 of using sink and source outputs
(Note): When the polarities are mixed, a warning occurs and the ERR LED on the unit flashes for urging users to
check the wiring.
To make warnings not to be announced, set "Warning annunciation" to "Not announce" in the "Multi I/O Unit
Setting" screen of tool software FPWN GR7. (Available since Ver.1.1.) Or, set the bit 9 of UM00062 to 1.
5.2 Output Terminal Setting
5-5