Panasonic FP7 User Manual page 105

 Time chart
If the rising of the start signal is detected when the enable input is on, pulses will be output.
When the enable input turns off, the pulse output will stop.
PWM0 EN
(Y118)
PWM0 ST
(Y11C)
PWM0
(Y108)
①
If the rising edge of the start signal is detected when the enable signal is on, pulses will be output.
②
Pulse output with a duty ratio of 50%.
③
When the enable signal turns off, the pulse output will turn off.
(Note): The pulse output starts in the OFF period.
 Sample program
The external inputs (X140, X141) are allocated to the enable (Y118) and start (Y11C) signals
of PWM output respectively.
X140
X141
DF
（ ）
9.4 Execution Example of Pulse Output / PWM Output Function
①
②
Y118
Y11C
③
9-19