Panasonic FP7 User Manual page 230

Specifications
Setting value (UM00141/UM00140)
Function
Setting value
Comparison output setting
H0
H1
ON when elapsed value is
smaller than setting value
H2
H3
H4
H5
ON when elapsed value is larger
than or equal to setting value
H6
H7
H8
H9
ON when elapsed value is
smaller than setting value
HA
HB
HC
HD
ON when elapsed value is larger
than or equal to setting value
HE
HF (Default)
Allocation of unit memories （UM00143/UM00142）: Comparison output enable setting
UM no.
Bit no. b15-b12
CMP no.
CMP7
Setting value
Initial value H F
(Hex)
The setting for enable/disable the comparison output and the output destination are set by
writing the values on the next page to the 4 bits allocated to each comparison output number.
When allocating them using the tool software, it is not necessary to write them.
Setting value
Comparison
output setting
H0
Enabled
H1
H2 to HE Disabled
HF (Default) Disabled
(Note 1): If it conflicts with the deviation counter clear when setting the positioning function for the positioning unit (H
type), the external terminal cannot be selected as the output destination.
(Note 2): For the unit ver.1.0x, "Internal I/O only" cannot be selected as the output destination. When "Internal I/O
only" is selected in the tool software, the comparison output function is set not to be used.
(Note 3): When "Internal I/O only" is set as the output destination, the terminal is the general-purpose I/O.
13-38
UM00143
b11-b8 b7-b4
CMP6 CMP5
H F H F
Functions
Output destination
External terminal / Internal I/O (Note 1)
Internal I/O only (Note 2) (Note 3)
Counter channel to be compared
HSC-CH0
HSC-CH1
External input counter
HSC-CH2
HSC-CH3
HSC-CH0
HSC-CH1
External input counter
HSC-CH2
HSC-CH3
PLSC-CH0
PLSC -CH1
Pulse output/PWM
output counter
PLSC -CH2
PLSC -CH3
PLSC-CH0
PLSC -CH1
Pulse output/PWM
output counter
PLSC -CH2
PLSC -CH3
b3-b0 b15-b12 b11-b8
CMP4 CMP3 CMP2
H F H F
Disabled
Disabled
UM00142
b7-b4 b3-b0
CMP1 CMP0
H F H F H F