Panasonic FP7 User Manual page 103

 Time chart
If the rising of the start signal is detected when the enable input is on, pulses will be output.
The pulse output counter reaches the comparison value, the pulse output will stop.
①
If the rising edge of the start signal is detected when the enable signal is on, pulses will be output.
②
The pulse is output.
When the comparison output turns on, the pulse output will stop. Also, when the enable signal turns off, the
③
pulse output will turn off.
 Sample program
The external inputs (X140, X141) are allocated to the enable (Y118) and start (Y11C) signals
of pulse output respectively.
X140
X141
DF
（ ）
9.4 Execution Example of Pulse Output / PWM Output Function
Y118
Y11C
9-17