Input Specifications - Panasonic FP7 User Manual

Input/Output Specifications and Wiring

3.1.3 Input Specifications

Item
Insulation system
Rated input voltage
Rated input current
Input impedance
Operating voltage range
Min. ON voltage/Min. ON
current
Min. OFF voltage/Min. OFF
current
OFF→ON
Response
time
ON→OFF
Min. input pulse width
Input time constant setting
Input points per common
(Note 1): The mode of input voltage is selected by software. The default is the 5-24 V mode.
(Note 2): The default value of input time constant is 2 µs.
 Limitations on number of simultaneous input on points
16 16
12 12
Number of
points per
common 8 8
which are
simulta-
neous on
Ambient
temperature (℃）
(Note): There is no limitations on the number of simultaneous input on points in the ambient temperature range
between 0 to 55 °C when using 12 V DC or 5 V DC.
Use the input voltage within ±10% of 5 V, 12 V or 24 V. Heat or chattering
•
may be generated when using a voltage out of this range.
3-4
5 - 24 V mode
(It automatically varies according to the input voltage.)
(It automatically varies according to the input voltage.)
4.2 V / 3 mA
2.8 V / 1 mA
0,0.5 μs / 1 μs / 1.5 μs / 2 μs / 4 μs / 8 μs / 16 μs / 32 μs / 64 μs / 96 μs /
128 μs / 256 μs / 2 ms / 4 ms / 8 ms (Note 2)
at 24V DC
at 26.4V DC
50 52 55
Specifications
Digital isolator
5V / 12V / 24V DC (Note 1)
Approx. 2 mA to approx. 10 mA
Approx. 0.5 kΩ to approx. 4.3 kΩ
±10% of each voltage
1.0 µs or less (at 5 VDC)
0.5 µs or less (at 12 VDC)
0.5 µs or less (at 24 VDC)
1.0 µs or less (at 5 VDC)
2.0 µs or less (at 12 VDC)
3.5 µs or less (at 24 VDC)
1.0 µs (at 5/12 VDC)
2.0 µs (at 24 VDC)
4 points/1 common (±common)
12 - 24 V mode
7.5 V / 3 mA
5.0 V / 1 mA