Counter Mode Setting Area - Panasonic FP7 User Manual

Specifications

13.4.5 Counter Mode Setting Area

 Counter mode setting
Unit
memory no.
Name
（Hex）
Counter mode
UM0010C
setting (CH0-CH1)
Counter mode
UM 0010D
setting (CH2-CH3)
Allocation of unit memories
UM no.
Bit no. b15-b12
Setting
channel
Input
Setting item
mode
Setting value
Initial value H 0
(Hex)
The values (Hex) of setting channel and setting item are written to the four bits of the unit
memory. When allocating them using the tool software, it is not necessary to write them.
Setting value (Input mode)
Setting value Function
Direction distinction
H0 (Default)
(Note 2)
H1 Individual input
H2
H3 Phase input
H4
H5 to HF Not used
Setting value (Function)
Setting value Count mode
H0 Ring
H1 Linear
Ring
H2
Linear
H3
H4 to HE Invalid (Note1)
HF (Default) Not used (Note 2)
(Note 1): Do not use this setting.
(Note 2): It shows the default value on the unit side.
(Note 3): The counters CH2/CH3 cannot be used in the elapsed value hold mode.
13-34
Default
H 0F0F
H 0F0F
UM0010D
b11-b8 b7-b4
CH3 CH2
Input
Function
mode
H F H 0
Multiplication
function
None
1 multiple
2 multiple
4 multiple
Elapsed value hold
mode
Not used
Used (Note 3)
Invalid
Setting range and description
Specify a counter mode.
b3-b0 b15-b12 b11-b8
CH1
Input
Function Function
mode
H F H 0
R
A
UM0010C
b7-b4 b3-b0
CH0
Input
Function
mode
H F H 0 H F
W
A