Panasonic FP7 User Manual page 153

 Selection of positioning operation modes
Positioning operation modes are selected on Configurator PMX.
• For the E-point control, input settings in one row.
• For P-point, C-point and J-point controls, they should be combined with E-point control of the
next step as a pair and the setting should be input in two rows.
KEY POINTS
• When E: End point is not selected in the next row of P: Pass point, C:
Continuance point or J: Speed point, the error code 44: Positioning error is
set in UM00066.
For details of positioning error codes, refer to "12.2.2 What to Do When
Positioning Error Occurs".
 Settings of J-point control
• For J-point control, select "Increment" as a control method.
• For changing speed during J-point control, set the target speed after the change in the
positioning parameter dialog box.
10.10 Positioning Control
10-47