Panasonic FP7 User Manual page 123

3. Click "Positioning" in the "Selection of function" tree, and double-click an
input number (or output number) to which the positioning function is
allocated.
The "Positioning Advanced" dialog box will be displayed.
Go to step 4.
4. Select a function setting and press the [OK] button.
The input and output of the positioning function will be allocated. A maximum of
four channels can be allocated. Allocated channel numbers are fixed.
Function setting
Unused
Use
Use (Use J point
terminal)
(CH0/CH1 only)
Description
The positioning function is not allocated.
The input and output of the positioning function including near home
input are allocated.
The input and output of the positioning function including J point control
positioning start input are allocated.
10.4 Setting of Positioning Function
10-17