Multi I/O Unit Setting
5.1 Basic Setup
The settings of the multi I/O unit are specified in the configuration menu of FPWIN GR7.
The input voltage mode, input time constant and output polarity can be switched by the setting
of the software. The default setting for the output is "Output OFF". Change the setting
according to purposes.
PROCEDURE
1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.
2. Select a type of Multi I/O Unit.
The basic setup screen of "Multi I/O Unit Setting" will be displayed.
3. Set each item of the basic setup.
5-2