Names And Functions Of Parts - Panasonic FP7 User Manual

Names and Functions of Parts

2.1 Names and Functions of Parts
2.1.1 Names and Functions of Parts



 Names and functions of parts
No. Name
Operation monitor
①
LEDs
②
I/O connector
③
DIN hook
④
Unit connector
Mode setting
⑤
switches
⑥
Fixing hook
2-2

Function
Indicates the operation mode, error occurrence state and input and output
states. For details, refer to "2.1.2 Operation monitor LEDs".
Connector for input and output. (40-pin) (Conforms to MIL standard.)
This hook is used to install the unit on a DIN rail.
Connects the internal circuits between units.
Change the switch to use the interrupt function. At the factory setting, all the
switches are off (the setting not to use the interrupt function). For details, refer
to "2.1.3 Mode setting switches".
This hook is used to fix units.

