Connecting With Connector For Wire-Pressed Terminal Cable - Panasonic fp2/fp2sh User Manual

FP2/FP2SH
4.4.2

Connecting with Connector for Wire-pressed Terminal Cable

Connector for Wire-pressed Terminal Cable
This is a connector that allows loose wires to be connected without removing the wire's
insulation.
The pressure connection tool is required to connect the loose wires.
Connector for wire-pressed terminal cable (40 pins)
Rewiring
If there is a wiring mistake or the wire is incorrectly pressure-connected, the contact pull-
er pin provided with the fitting can be used to remove the contact.
Suitable Wires (twisted wire)
Size Cross section area
2
AWG22 0.3mm
2
AWG24 0.2mm
Connector for Wire-pressed Terminal Cable
Unit type Unit type
32−point input unit
32−point output unit
64−point input unit
64−point output unit
32−point input/32−point output unit
Pressure Connection Tool
Part number: AXY52000FP
4.4
Insulation thickness
dia.1.5 to dia.1.1
Composition of accessories
Housing Semi−cover
1 pc 2 pcs
2 pcs 4 pcs
Installation and Wiring
Wiring the Connector Type I/O Units
Press the housing against
the pressure connection tool
so that the contact puller pin
comes in contact with this
section.
Rated current
3A
Contact
5 pins x 8
5 pins x 16
4 − 25