Ac Power Receptacle - Nortel BayStack 410 24T Using Manual

AC Power Receptacle

The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
Table 1-2
Table 1-2.
Country/Plug description
Australia:
• AS3112-1981 Male plug
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
U.S./Canada/Japan:
• NEMA5-15P male plug
• UL recognized (UL stamped
on cord jacket)
• CSA certified (CSA label
secured to the cord)
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
309985-B Rev 00
lists specifications for international power cords.
International Power Cord Specifications
Introduction to the BayStack 410-24T Switch
Specifications
240 VAC
50 Hz
Single phase
220 or 230 VAC
50 Hz
Single phase
100 or 120 VAC
50–60 Hz
Single phase
240 VAC
50 Hz
Single phase
Typical plug
230FA
228FA
227FA
229FA
1-7